Operation In Dab-Mode - Renkforce NE-6210 Bedienungsanleitung

Menu Structure
DAB
Full scan
System
Prune
Manual tune
c) Operation in DAB-Mode
Search
• The automatic "Full scan" searches through all DAB channels and thus will find all
stations that are broadcast in the reception area.
• In the DAB menu, select the item "Full scan" and push the SELECT (8) button.
• The scan starts and the progress bar and number of stations found appear in the
display (7).
• After completion of the station scan, the first station in alphanumeric order is played
back.
If no station is found, check the alignment of the telescopic aerial and if re-
quired, change the site of setup of your device.
Check if DAB stations are broadcast in your area.
Station selection
• Push the (4) or
• Push the button SELECT (8) to confirm your selection.
System
Time
SW version
Factory Reset
Backlight
Sleep
(6) button until the desired station appears in the display (7).
FM
Scan setting
System
Audio setting
Time
Set Time/Date
Set date format
Set 12/24 hour
Auto update
33