Adjusting The Sound Characteristics; Quickly Attenuating The Sound; Changing The Sound And Display Settings - Sony CDX-CA600X Bedienungsanleitung

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by turning the
VOL control dial.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT).
After "ATT-ON" momentarily flashes, the
"ATT" indication appears in the display.
To restore the previous volume level, press
(ATT) again.
"ATT-OFF" flashes momentarily.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
20
Changing the sound and
display settings
The following items can be set:
1
•AMBER/GREEN*
– to change the illumination colour to amber
or green
•CT (Clock Time) (page 18).
•A.SCRL (Auto Scroll)*
•M.DSPL (Motion Display)
– the demonstration mode which appears
when no source is selected (e.g., tuner is
turned off).
•BEEP – to turn the beep sound on or off.
Selecting the desired item
Press (SEL) and the desired preset
number button simultaneously.
(SEL) + (1): AMBER/GREEN*
(SEL) + (2): CT
(SEL) + (3): A.SCRL*
(SEL) + (4): M.DSPL
(SEL) + (6): BEEP
1 CDX-CA600 only
*
2 When no CD is playing, this item will not
*
appear.
After the mode setting completed, the display
returns to normal play mode.
Note
The displayed item will differ depending on the
source.
To cancel the item, press (SEL) and the preset
number button simultaneously again.
2 (page 10).
1
2