Yamaha BD-A1010 Bedienungsanleitung Seite 32

SETUP MENU
Menu/Submenu
TV
Display Setting
Video Process
Audio Output
Audio Setting
SACD Output
Speaker Setting
Post Process
System
Information
28
En
Item
3D Output Selects 3D or 2D videos.
TV Screen Sets the screen aspect ratio of the connected TV, and adjust
the video output.
Resolution Selects the resolution of output video.
TV System Selects the TV System from NTSC/PAL/Multi.
Color Space Selects Color Space from RGB/YCbCr 4:4:4/YCbCr 4:2:2/
Full RGB.
HDMI Deep Color Selects HDMI Deep Color from 30 bits/36 bits/Off.
HDMI 1080p 24Hz Sets HDMI 1080p 24Hz to auto/off.
Lip Sync Adjusts the lag between video and audio, such as when the
mouth movement is out of sync with the voice.
Video Mode Adjusts the visual image.
Color Adjust Adjusts Brightness/Saturation/Hue for each color.
Auto Contrast Adjusts contrast to optimize the played back image.
Noise Reduction Sets the level of Noise Reduction.
De-interlacing Sets how to detect the video signal.
Mode
Coaxial/Optical Selects the output mode of COAXIAL jack/OPTICAL
terminal from Bitstream/PCM/Reencode/Off.
HDMI Selects the output mode of HDMI terminal from Bitstream/
PCM/Reencode/Off.
Downsampling Selects the digital audio signal down sampling frequency
from 48k/96k/192k.
DRC Sets the DRC (Dynamic Range Compression).
SACD Priority Selects a contents when Hybrid SA-CD is played back.
HDMI Output Selects the output mode of HDMI terminal from DSD/PCM
when SA-CD is played back.
Configuration Sets the audio output of 7.1 ch surround jack.
2ch Downmix Selects down mix method to analog 2-ch.
Up Mix Multi-channelizes the 2-channel audio signal.
Displays software version and MAC address (p. 42).
Function Page
32
32
33
33
33
33
33
33
33
33
33
33
34
34
34
34
34
34
34
34
34
34
34