Dmo Group Calls; Making A Dmo Group Call; Receiving A Dmo Group Call; Exiting Dmo - Motorola MTP850 S Bedienungsanleitung

To turn on/off this feature, press
Tones > D-PTT Mode.

DMO Group Calls

In DMO the MTP850 can be used without your Service Provider's
infrastructure.
DMO allows communication with other terminals also operating in
DMO, which are on the same frequency and group as your
MTP850.
In DMO it is only possible to place the following call types: Group
Calls, Emergency Group Calls, Private and Private Simplex Calls.
When you start a call, the members of the selected group who have
their units turned on will receive the Group Call.
In DMO the MTP850 can communicate with the trunking system
(and vice-versa) if the Gateway option is enabled in the MTP850.

Making a DMO Group Call

1. Enter Direct Mode by pressing Optns and selecting Direct
Mode.
2. Make sure that you have selected the required group. Press and
hold the PTT button.
3. Wait for the talk permit tone and then speak into the microphone.
Release the PTT button to listen.

Receiving a DMO Group Call

You can receive a DMO Group Call only when your MTP850 is
in DMO.
Unless it is engaged in a call, your MTP850 will receive the Group
Call. To answer the call, press and hold PTT.
Your MTP850 shows the group name and the caller's private
number or alias if previously stored in your contact list.

Exiting DMO

To exit DMO, press Optns and select Trunked Mode.
38
> Setup > Tones > D-PTT
MENU