Items Supplied; Before Using For The First Time; Operation - Silvercrest SDB 2400 E3 Bedienungsanleitung

4. Items supplied

1 steam iron
1 measuring beaker 19
1 set of operating instructions
5. Before using for the
first time
1. Ensure that you have pulled out the
mains plug 10.
2. Open the lid 2 (of the water tank).
3. Pour water into the measuring beaker 19
and half-fill the water tank 13.
4. Insert the mains plug into a wall sock-
et 10 corresponding to the technical
data.
5. Set the temperature controller 15 to
MAX.
The temperature control lamp
lights up.
6. When the device has reached the de-
sired temperature (temperature control
lamp 7 goes out), iron an old cotton
cloth in steam mode until the water
tank 13 is empty.

6. Operation

DANGER!
The sole plate 18 becomes very hot
during operation. During operation
touch only the handle 8 and the control
elements of the steam iron.
Even during short interruptions, always
place the steam iron on the base
unit 12 and never on its sole plate 18.
There is a fire hazard!
NOTES:
• Not all materials are suitable for iron-
ing. Follow the care instructions, e.g. in-
side the clothing.
• You may notice an odour when using
for the first time. This is a result of the
manufacturing process and is not a de-
7
fect with the device. Ensure adequate
ventilation.
The sole plate 18 cools down slightly during
ironing. In order to reach the set temperature
again, the device heats the sole plate 18 up
again, during which the temperature control
lamp 7 is lit. The temperature control
lamp 7 goes out again when the set tem-
perature is reached. This process repeats it-
self during ironing.
Simply continue ironing during the heating
phase.
7
GB