Herunterladen Inhalt Inhalt Diese Seite drucken

Packing List - EGO ST1300E Bedienungsanleitung

Kabelloser fadenmäher 56 volt
Vorschau ausblenden Andere Handbücher für ST1300E:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Battery tools do not have to be plugged into an
EN
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when
the tool is not operating. Take care when performing
maintenance or service.
Do not wash with a hose; avoid getting water in motor
and electrical connections.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
Always wear substantial footwear and long trousers
while operating the machine.
Always be sure of the footing on slopes and to walk,
never run.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
No-load Speed
Cutting Mechanism
Cutting Line Type
Cutting Width
Weight (without battery pack)
Measured sound power level L
Max. sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
Front handle
Valuation of
vibration a
h
Rear handle
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used;In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
8
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E
56 V
High: 6500 /min
Low: 5200 /min
Bump Head
AL0802 2.0mm
Nylon twist line
33 cm
2.76 kg
89.25 dB(A)
K=2.5 dB(A)
WA
75.2 dB(A)
K=2.5 dB(A)
93 dB(A)
WA
2.134 m/s
2
K=1.5 m/s
2
1.231 m/s
2
K=1.5 m/s
2

PACKING LIST

PART NAME
Line Trimmer
Guard
Front-assist Handle Assembly
Hex Wrench
Operator's Manual
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A)
1. Trigger
2. Rear Handle
3. Lock-off Lever
4. Speed Adjustment Switch
5. Soft Sleeve
6. Adjustable Front-assist Handle
7. Trimmer Head (Bump Head)
8. Bump Knob
9. Line-cutting Blade
10. Guard
11. Ejection Mechanism
12. Electric Contacts
13. Latch
14. Battery-release Button
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or
create accessories not recommended for use with this line
trimmer. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
MOUNTING THE GUARD
WARNING:
Always wear gloves when mounting or
replacing the guard. Take care of the blade on the guard
and protect your hand from cutting.
QUANTITY
1
1
1
1
1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis