Before The First Wash Cycle; Programming And Starting Of A Washing Programme - Pkm WA6-E1008N Bedienungsanleitung

Rinse and spin
Spin

3.5 Before the first wash cycle

To remove potential residues caused by production, testing or transportation of the
appliance, a quick programme without laundry should be started before the first
regular wash cycle.
1 Open the tap.
2 Close the door.
3 Add some washing detergent (approx. 30 ml) into the main chamber
dispenser.
4 Select and start a quick-programme (s. chapter 3.6 P
STARTING OF A WASHING PROGRAMME

3.6 Programming and starting of a washing programme

1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Press the O /O
N
5. Set the desired programme using the
6. The display indicates the duration of the programme (hours : minutes).
7. Additionally to the selected programme, further washing functions such as rinse
hold, extra rinse, prewash, spin speed etc. can be selected by pressing the
corresponding buttons (s. chapter 3.6.1
)
FUNCTIONS
8. Press the
START
It is possible that the current run time will be adjusted automatically so that it
may vary from the washing time which is shown on the display.
 Extra Rinse
 Spin speed (up to 800 rpm max.)
 Reload laundry
 Delay
 Extra Rinse
 Spin speed (up to 1000 rpm max.)
 Reload laundry
 Spin speed (up to 1000 rpm max.)
 Reload laundry
- .
FF BUTTON
/ to start the washing programme.
PAUSE BUTTON
ROGRAMMING AND
).
.
ROTARY KNOB
SELECTING OF THE ADDITIONAL
52
of the