Specifications; Operation - Ryobi CCG-1801M Bedienungsanleitung

GB
F D
GENERAL SAFETY RULES
Maintain power tools. Check for misalignment or
■
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits, etc.
■
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
BATTERY TOOL USE AND CARE
Ensure the switch is in the off position before
■
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away
■
from other metal objects like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be ejected
■
from the battery, avoid contact. If contact
accidentally occurs, flush with water. If liquid contact
eyes, additionally seek medical help. Liquid ejected
from the battery may caused irritation or burns.
SERVICE
Have your power tool serviced by an authorised
■
service centre using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
E I P NL S DK N FIN GR
English

SPECIFICATIONS

Model
Voltage
Battery pack:(not included)
Charger (not included)
No load speed
- High
- Low
Weight
DESCRIPTION
1. Caulk Gun
2. Plunger Rod
3. Puncture Tool
4. Carriage Frame
5. Switch Trigger
6. Switch Lock
7. Variable Selector
8. Plunger Rod Handle
9. Battery Pack (Not included)
10. Latches
11. Spout
12. Caulk Tube (Not included)

OPERATION

APPLICATIONS
You may use this tool for the following purposes:
Sealing cracks to keep your home's conditioned air
■
inside while keeping unconditioned air outside,
increasing your home's energy efficiency.
Filling holes and cracks before painting.
■
7
RO
H CZ RUS
CCG-1801M
18 V
BPP-1817M / BPP-181M
BC-1815S / BC-1800
5.5 mm/s
1 mm/s
...kg
WARNING
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal injury.
HR
PL SLO TR