Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSR 10,8-2-LI Professional Originalbetriebsanleitung

OBJ_BUCH-970-001.book Page 18 Thursday, July 2, 2009 11:48 AM
18 | English

Technical Data

Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear min
– 2nd gear min
Max. torque for
hard/soft screwdriv-
ing application ac-
cording to ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping
range
Weight according
to EPTA-Procedure
01/2003
Technical data determined with battery from delivery
scope.
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 71.5 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a <2.5 m/s , Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a <2.5 m/s , Uncertainty K =1.5 m/s
h
2 609 140 658 | (2.7.09)
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
GSR 10,8-2-LI
may be used to compare one tool with another.
Professional
It may be used for a preliminary assessment of
3 601 H68 1..
exposure.
The declared vibration emission level repre-
V= 10.8
sents the main applications of the tool. However
if the tool is used for different applications, with
-1
0 – 350
different accessories or poorly maintained, the
-1
0 – 1300
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
Nm 30/13
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
mm 10
nificantly reduce the exposure level over the to-
mm 19
tal working period.
mm 7
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
mm 1.0 – 10
the hands warm, organisation of work patterns.

Declaration of Conformity

kg 0.95
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
,
11.05.2009
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools