Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Hilti TE 3000-AVR Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TE 3000-AVR:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Rated voltage
Rated power
input
Rated current
input
Power tool
en
Mains frequency
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Hammering frequency under load
Single impact energy in accordance with EPTA proced-
ure 05/2009
Weight of transport trolley
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level, TE 3000-AVR
Typical A-weighted emission sound pressure level, TE
3000-AVR
Uncertainty for the given sound level for the
TE 3000‑AVR
Additional information in accordance with EN 60745-1
Triaxial vibration values (vibration vector sum)
Chiseling, a
h, Cheq
Uncertainty (K)
Information about the power tool and its applications
Protection class as per EN

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety
rules for power tools which, in accordance with the
applicable standards, require to be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
18
100 V
110 V
1,500 W
1,760 W
15 A
16 A
220 V
230 V
2,070 W
2,070 W
9.4 A
9 A
TE 3000‑AVR
50...60 Hz
29.9 kg
808 mm x 610 mm x 209 mm
860/min
68 J
10.8 kg
105 dB (A)
94 dB (A)
3 dB (A)
measured in accordance with EN 60745‑2‑6
7 m/s²
1.5 m/s²
Protection class II (double insulated)
5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
240 V
2,070 W
8.6 A

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis