Reporter 200DI
2
Properties
The Sachtler Reporter 200 DI is designed to be used manually
or on light stands. The luminaire must be operated with the
Batronic 1, Batronic 2 or Silent 200.
Ensure that the permissible operating position is maintained.
± 80°
3
Operation
3.1 Inserting the bulb
Please first adhere to the bulb manufacturer's instructions
included in the packing.
➪ Do not touch quartz glass bulb with bare fingers.
Use only bulb types:
Open the luminaire by pulling both clips on the side of the
housing upwards. Pull reflector housing off. When fitting the
new bulb ensure that it is inserted correctly by pushing it
firmly into the socket until it clicks into position. If the bulb
is not completely inserted into the socket, an uneven light
distribution will result or the bulb cannot be ignited at all.
When putting the reflector housing back in place, please
ensure its correct positioning. The contact knob on the
reflector housing must activate the contactor of the safety
± 30°
Philips MSR 200 HR
Osram HMI 200 SE
- 2 -
Manual