Setting The Time - Silvercrest SWE 100 B1 Bedienungsanleitung

To power the device off, press the On/Off button [8] again. When
powered off, the current time will be shown on the display [7].

Setting the Time

The time can only be set while the device is powered off. If it is still
powered on, press the On/Off button [8] to power the device off.
 Press and hold the TIME button [15].
 Then press the HOUR button [13] repeatedly to set the hour. You can
also keep the HOUR button [13] pressed down to accelerate the digit
adjustment. To distinguish ante meridian (morning) and post meridian
(afternoon) time for the 12-hour display, "PM" [27] will display for post
meridian clock hours.
 Keep the TIME button [15] pressed. Then press the MIN button [12]
repeatedly to set the minutes. You can also keep the MIN button [12]
pressed down to accelerate the digit adjustment.
 Release the TIME button [15] after the clock has been set correctly.
Use the 12H button [17] and 24H button [16] to change
between the 12- and 24-hour time display.
Please note that you should adjust the clock when you
move into a different time zone.
Multi-Band Tuner SWE 100 B1
English - 19