Hornbach 6145059 Montage- Und Gebrauchsanweisung Seite 104

Connect roller tube and front
Connect the 2 parts of the roller
tube 8 and the front bar 1 with
the supplied screws.
Connect support bars to stand
Connect the support bars to
bottom parts of the stand poles
5. Then connect the two parts
each of the left and right stand
poles 5 to the height adjusting
screws.
Slide the front bar 1 into the
front sleeve of the awning.
Then slide the wire into the rear
sleeve and attach the roller tube
8 to the rear of the awning.
Roll the awning 6 onto the roller
104 | ENGLISH
1
bar
2
poles
3
tube 8.