Extra Features; Mode Reassignment (Changing A Device Mode) - One for All URC-3740 Bedienungsanleitung

It is possible to change the mode of any device key. This is useful if you
want to set up two of the same devices on the ONE FOR ALL 4. The code
can be set up using "Direct code set up" (pag. 5) or "Search method" (pag.
6). To change a device key, see the three examples below.
Example 1)
Example 2)
Example 1:
To program a second Television on the AMP key (for example), you need
to change the AMP key into a TV key, so press:
(*)
The AMP key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
Example 2:
To program a second Television on the DVD key (for example), you need
to change the DVD key into a TV key, so press:
(*)
The DVD key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
Resetting a Device key
Example: To reset the AMP key to its original mode, press:
(*)
Example: To reset the DVD key to its original mode, press:
(*)
(*) Press and hold down the MAGIC key until the red LED underneath
the last selected device key will blink twice.
(**) The red LED underneath the last selected device key will blink twice.
WWW ONEFORALL COM

Extra Features

Mode re-assignment
(Changing a device mode)
if you want to program a second TV on the AMP key.
if you want to program a second TV on the DVD key.
(*)
(*)
(TV code) (**)
_ _ _ _
(TV code) (**)
_ _ _ _
(**)
(**)
(**)
(**)
13