Receiving The Memorised Stations; Rds Functions; Overview Of The Rds Function; Displaying The Station Name - Sony CDX-5100RDS Bedienungsanleitung

Receiving the Memorised
Stations
1
Select the desired band.
TUNER
2
Press momentarily the preset number
INTRO
button ( to ) on which the
1 6
desired station is stored.
Note
If you press the preset number button for more than two
seconds, the currently received station will be memorised.
To receive the previously memorised station, make sure
that the preset number button is pressed only momentarily.
Press either side of the PRESET button
momentarily to receive other stations
stored in the memory (Preset Search
Function).
PRESET
Press momentarily
1 n 2 n 3 n 4 n 5 n 6 n 1 n ···
Press momentarily
1 n 6 n 5 n 4 n 3 n 2 n 1 n ···
Actual total number:

RDS Functions

Overview of the RDS
Function
RDS (Radio Data System) is a system which
uses FM radio waves to receive digital signals.
Receiving RDS data with your car stereo unit
allows it to use a variety of services. There are
several ways to use these services. For
instance, you can receive information such as
traffic announcements and station names, or
you can cause the unit to automatically retune
to the strongest signal that is broadcasting the
same programme. So even if you travel a long
distance, it is still possible to listen to the same
programme without having to retune
manually again and again. Another function
allows you to receive traffic announcements
during CD playback.
RDS offers various functions, but depending
on the country or region, not all of these are
available. The following information explains
the RDS functions of this unit.
Notes
PRESET
• In case of weak signals or other poor reception
conditions, the RDS functions may not work properly.
• If the FM station currently received does not transmit
RDS data, the functions described below will not work.
Displaying the Station
Name
By using RDS data, the name of the station
currently received can be displayed.
Select an FM station. n If it is a station
transmitting RDS data, the station
name will appear on the display.
When "*" appears in addition to the usual
frequency indication, an RDS station is being
received.
Changing the displayed items
Each time you press the
change as follows:
Sony CDX-4100/5100RDS (
button, the displayed items
DSPL
z Frequency z Time z Station Name
Continue to next page n
E
,F,G,I) 3-810-809-11 (1)
EN
9