Herunterladen Diese Seite drucken

Blumax GPS-4044 Bedienungsanleitung

Bluetooth gps datenlogger

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

En
Bluetooth GPS Datalogger
User Manual
GPS-4044
GPS-

Werbung

Kapitel

loading

Inhaltszusammenfassung für Blumax GPS-4044

  • Seite 1 Bluetooth GPS Datalogger User Manual GPS-4044 GPS-...
  • Seite 3: Inhaltsverzeichnis

    1.2 Introduction ...........6 1.3 Features ............6 1.4 Package content ..........6 1.5 Appearance ...........7 2. Getting Started ..........8 3. Connecting GPS-4044 to your PC....11 4. Other Functions ..........12 4.1 LED Indicators ..........12 5. Helpful tips .............13 Appendix A. Specifi cations ........14 Appendix B.
  • Seite 4: Before You Begin

    4044 Recorder is recommended. Wireless GPS receiver may interfere with medical equipments which use radio frequency. • For a long period not using Blumax Bluetooth GPS-4044 Re- corder, take out the battery and store it in dry/cool places. • For safety, keep the Blumax Bluetooth GPS-4044 Recorder and all accessories out of children’s reach.
  • Seite 5 Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents, chemicals, or strong detergents. • Do not attempt to open the Blumax Bluetooth GPS-4044 Re- corder yourself. Unauthorized hacking may damage the unit, and void your warranty.
  • Seite 6: Introduction

    1.2 Introduction Thank you for purchasing Blumax Bluetooth GPS-4044 Datalogger with 66-Channels. It provides capability up to 125,000 recorded data and supports Smart Power control for prolonged operation time. 1.3 Features • Dual mode for both Data record and Navigation •...
  • Seite 7: Appearance

    2. Mode switch (Power off/ Navigation/ Navigation & log) 3. Bluetooth status LED (blue) 4. Battery status LED (red/green) 5. GPS status LED (orange) / Push to log LED (red) 6. Internal GPS antenna 7. Push Button - 7 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 8: Getting Started

    3~4 hours and you can charge from PC/ Notebook’s USB HOST or from cigarette-lighter in car. For the 1st time you use the GPS-4044 Recorder, please charge battery until it is full (the green LED is off). The LED that represents the battery is the right-most battery icon (shown in below).
  • Seite 9 Power Switch Right (Off) Power off Middle (NAV) Enable Navigation mode Enable Navigation + log mode (Data Left (LOG) record) Push button Push to log points of interest, LED Push blinks 3 times. - 9 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 10 PDA/ Smartphone in your car. The logging is off. Both of navigation and logging func- tions are enabled. Step 3. Connecting your handheld device with Blumax Blue- tooth GPS-4044 Datalogger. Step 4. Loading your GPS mapping or routing software Step 5. Starting the application...
  • Seite 11: Connecting Gps-4044 To Your Pc

    Step 3. For software utility how to use in detail: Refer to Help > User Manual Step 4. Build a connection between your PC and Blumax Bluetooth GPS-4044 Datalogger, see below: Please press the Auto Scan button to build a connection.
  • Seite 12: Other Functions

    4. Other Functions 4.1 LED Indicators Category Symbol Color Status Function Bluetooth on, but not Always on: connected to any Blue- tooth devices yet Slowly Sleeping mode (1 time Bluetooth blinking: / 5 seconds) Status Blue Bluetooth is connected Quickly and ready for data blinking: transmission (1 time /...
  • Seite 13: Helpful Tips

    Also weather will affect GPS reception – rain & snow contribute to worse sensitivity. • Low battery of a PDA or of an Blumax Bluetooth GPS-4044 Da- talogger may affect signal receptions. • Please check the correct “COM” and “Baud Rate” of your PDA to secure the Bluetooth connection between Blumax Bluetooth GPS-4044 Datalogger &...
  • Seite 14: Appendix A. Specifi Cations

    Appendix A. Specifications General Frequency L1,1575.42 MHZ C/A Code 1.023 MHZ Datum WGS 84 Performance Characteristics Position Accuracy Without aid: 3.0 m 2 D-RMS < 3 m CEP (50%) without SA (horizontal) DGPS (WAAS, EGNOS, MSAS): 2.5 m Velocity Accuracy Without aid: 0.1 m/s DGPS (WAAS, EGNOS, MSAS): 0.05 m/s Acceleration...
  • Seite 15 32 Mb serial Flash ROM Up to 125,000 way points. Log GPS data by time interval/ distance/ speed limit. Log GPS data by button push. User can confi gure settings by using utility. - 15 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 16: Appendix B. How To Change Battery

    Step 2 Open the cover Step 1 Press the button of battery to right side Step 3 Take out the battery Step 4 Fit new battery into GPS-4044 Step 5 From R to L close Step 6 Done the cover - 16 -...
  • Seite 17: Appendix C. Certifi Cation

    NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UN- AUTHOURIZED MODIFICATION TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AU- THORITY TO OPERATE THE EQUIPMENT. - 17 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 18 CE Notices Is herewith confi rmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromag- netic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC.
  • Seite 19: Appendix D. Warranty Information

    This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration of repairs. The company assumes no responsibility for special, incidental punitive or consequential damages, or loss of use. - 19 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 20 Bluetooth GPS Datenlogger Bedienungsanleitung GPS-4044 GPS- - 20 -...
  • Seite 21 1.2 Einführung ..........24 1.3 Eigenschaften ..........24 1.4 Lieferumfang..........24 1.5 Äußere Merkmale ........25 2. Erste Schritte ..........26 3. GPS-4044 mit dem PC verbinden ....28 4. Nützliche Tipps ..........29 Appendix A. Batteriewechsel ......31 Appendix B. Spezifi kationen ......32 - 21 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 22: Bevor Sie Beginnen

    Apparate stören, die auch mit Funkwellen funktionieren, und zu Fehlfunktionen führen. • Wenn Sie Ihren Blumax Bluetooth GPS-4044 für längere Zeit nicht benutzen möchten, nehmen Sie den Akku heraus und la- gern Sie ihn an einem kühlen und trockenen Ort.
  • Seite 23 öffnen. Dabei könnten Sie das Gerät beschädigen und die Garantie verlieren. Warnung: Wenn Sie mehr als 125,000 Wegpunkte in Ihrem Blumax Blu- etooth GPS-Datenlogger 4044 gespeichert haben, könnte beim Anzeigen dieser Punkte in Google Earth der gesamte Arbeits- speicher Ihres Computers ausgelastet werden. Wenn Ihr Com- puter nicht über genügend RAM verfügt, könnte sich das System...
  • Seite 24: Einführung

    1.2 Einführung Vielen Dank, dass Sie sich für den Blumax Bluetooth GPS- Datenlogger 4044 mit 66 Kanälen entschieden haben. Er kann bis zu 125,000 Wegpunkte speichern und das intelli- gente Energiemanagement sorgt für eine besonders lange Betriebszeit 1.3 Eigenschaften •...
  • Seite 25: Äußere Merkmale

    1.5 Äußere Merkmale 1. Strombuchse (Mini-USB) 2. Modus-Umschalter (Ausschalten/ Navigation/ Navigation & Loggen) 3. Bluetooth-Status-LED (blau) 4. Batterie-Status-LED (rot/grün) 5. GPS-Status-LED (orange) / Loggen-auf-Knopfdruck-LED (rot) 6. Interne GPS-Antenne 7. Druckknopf - 25 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 26: Erste Schritte

    2. Erste Schritte Schritt 1. Akku aufl aden. • Wenn die LED rot leuchtet, ist der Akku-Status kritisch niedrig. Bitte aufl aden. • Wenn die LED grün leuchtet, wird der Akku aufgeladen. • Wenn die LED erlischt, ist der Ladevorgang abgeschlossen. LED, zeigt den Batteries-...
  • Seite 27 Sowohl die Navigations- als auch die Logger- Funktion sind eingeschaltet. Schritt 3. Verbinden Sie Ihren PDA oder Ihr Smartphone mit dem Blumax Bluetooth GPS-Datalogger 4044. Schritt 4. Laden Sie Ihre GPS-Karten-/Routensoftware Schritt 5. Starten Sie die Software. - 27 -...
  • Seite 28: Gps-4044 Mit Dem Pc Verbinden

    3. GPS-4044 mit dem PC verbinden Verbinden Sie den GPS-4044 mit Ihrem PC, um Ihre Rou- te wiederzugeben. Schritt 1. Google Earth* installieren: Laden Sie die Software von http://earth.google.com/ herun- ter und installieren sie. Schritt 2. Führen Sie folgende Software aus: GPS Photo Tagger und USB-Treiber (auf der CD) Schritt 3.
  • Seite 29: Nützliche Tipps

    Satelliten hat. Auch das Wetter kann den GPS-Empfang beeinfl ussen – Regen und Schnee führen zu schlechterem Empfang. • Ein niedriger Batteriestand von PDA oder Blumax Blue- tooth GPS-Datenlogger 4044 kann zu schwachem Emp- fang führen. - 29 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 30 Bluetooth-Verbindung zwischen dem Blumax Bluetooth GPS-Datenlogger 4044 und dem PDA sicherzustellen. • Der Blumax Bluetooth GPS-Datenlogger 4044 sendet jede Sekunde Daten, deshalb könnte die Anzeige Ihrer tatsäch- lichen Position ein wenig verzögert sein. Dies passiert vor allem, wenn Sie mit größerer Geschwindigkeit im Auto un- terwegs sind oder um eine Ecke biegen.
  • Seite 31: Appendix A. Batteriewechsel

    Appendix A. Batteriewechsel Schritt 2 Schritt 1 Schritt 3 Schritt 4 Schritt 5 Schritt 6 - 31 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 32: Appendix B. Spezifi Kationen

    Appendix B. Spezifikationen Allgemein Frequenz L1,1575.42 MHZ C/A Code 1.023 MHZ Datum WGS 84 Leistung Positionsgenauigkeit Ohne Hilfsmittel: 3.0 m 2 D-RMS < 3 m CEP (50%) ohne SA (horizontal) DGPS (WAAS, EGNOS, MSAS): 2.5 m Geschwindigkeit Ohne Hilfsmittel: 0.1 m/s DGPS (WAAS, EGNOS, MSAS): 0.05 m/s Beschleunigung Ohne Hilfsmittel: <...
  • Seite 33: Daten Loggen

    32 Mb serial Flash ROM Bis zu 125,000 Punkten speicherbar Automatisches Loggen von GPS-Daten nach Zeit/ Entfernung /Geschw. Speichert einen einzelnen Punkt mit nur einem Knopfdruck Grundeinstellungen können durch den Benutzer festgelegt werden - 33 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 34 - 34 -...
  • Seite 35 - 35 - Blumax Bluetooth GPS-4044 Recorder...
  • Seite 36 www.blu-max.eu...