Sony DSX-A500BD Bedienungsanleitung Seite 28

NO INFO (no information)
 There is no label information for the current DAB
service.
NO SERV (no service)
The DAB signal cannot be received.
 Perform an auto scan (page 11).
 Check the connection of the DAB antenna
(aerial).
 Check that [ANT-PWR] is set to [ON] (page 20).
NO TP: No traffic programs.
 The unit will continue searching for available TP
stations.
OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
 Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
RECEIVING
 The DAB band is selected and the unit is waiting
to receive a service.
USB ERROR: The USB device cannot be played.
 Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
 Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 23).
USB NO SUPRT: The USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site on the back cover.
28
GB
For BLUETOOTH function:
ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
NO DEV: The BLUETOOTH device is not connected
or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
P EMPTY: No phone numbers are stored.
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.