Electrical Connection; Before You Start Using Your Dryer; Maximum Load - Hotpoint Ariston TCD 871 Bedienungsanleitung

Installation
Electrical connections
Make sure of the following before you
insert the plug into the the electrical socket:
Make sure your hands are dry.
●
The socket must have an earth connection.
●
The socket must be able to sustain the
●
machines maximum power, which is
indicated on the rating label (see Dryer
Description).
Power voltage must be within the values
●
indicated on the rating label (see Dryer
Description).
The socket must be compatible with the
●
dryers plug. Should this not be the case,
replace the plug or the socket.
! The dryer must not be installed outdoors,
even if the space is sheltered. It can be
very dangerous if it is exposed to rain or
storms.
! Once installed, the dryers electrical wire
and plug must be within easy reach.
! Do not use extension cords.
! The power cord must not be bent or
squashed.
! The power cord should be regularly
checked. If the supply cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard. New or
longer power cords are supplied at an extra
charge by authorised dealers.
! The manufacturer denies any responsibility
should any of these rules not be followed.
! If in doubt about any of the above consult a
qualified electrician.

Before you start using your dryer

Once you have installed your dryer and before you
use it, clean the inside of the drum to remove any dust
that could have accumulated during transport.

Maximum load

Natural fibres : 8 kg
GB
3