AEG Electrolux ARCTIS 65270 GA Benutzerinformation Seite 60

5. Unscrew the pin of the upper hinge
(d) and refit it on the opposite side.
6. Insert the door in the upper hinge
and refit the upper hinges (A).
Pay attention that the border of the
doors are parallel to the top border,
otherwise adjust the position of the
lower hinge of the door (A).
7. Unscrew the handle. Refit it on
opposite side after having pierced the
plugs with a punch. Cover the holes
left open with the plugs contained in
the documentation pack.
8. Reposition, level the appliance, wait
for at least one hour and then
connect it to the mains socket.
In any case you do not want to
carry out the above mentioned
operations, contact the nearest
After Sales Service Force. The After
Sales Service specialist will carry
out the reversibility of the doors at
your cost.
Attention:
After having reversed the opening direction of the doors check that all the
screws are properly tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. in that case, wait for the natural fitting of the
gasket or accelerate this process by heating up the part involved with a
normal hairdrier.
60