Precautions On The Built-In Bridge Battery (For Disposal) - Panasonic FZ-B2 series Bedienungsanleitung

DANGER
Precautions on the Built-in Bridge Battery
(for disposal)
<Only for model with Built-in Bridge Battery>
When disposing the battery, generation of heat, ignition or
rupture of the Built-in Bridge Battery may result.
Handling This Computer
„ Do Not Disassemble the Computer Except
When Disposing
Handling the Built-in Bridge Battery
„ Do Not Short the Positive (+) and Negative (-)
Contacts
„ Do Not Throw the Battery into a Fire or Ex-
pose It to Excessive Heat
„ Do Not Apply Shocks to the Built-in Bridge
Battery by Dropping It, Applying Strong Pres-
sure to It, etc.
„ Do Not Charge
„ Do Not Use
„ Do Not Deform, Disassemble, or Modify the
Battery
„ Avoid Extreme Heat (Near the Fire, in Direct
Sunlight, for Example)
WARNING
<Only for model with Built-in Bridge Battery>
Generation of heat, ignition or rupture of the Built-in Bridge
Battery may result.
„ Do Not Throw This Product Into a Fire or
Expose It to Excessive Heat
„ Do Not Insert Sharp Objects Into This Prod-
uct, Disassemble, or Modify It
„ Do Not Apply Shocks to the Product by Drop-
ping It, Applying Strong Pressure to It, etc.
„ Do Not Charge the Battery Using Methods
Other Than Those Specified
„ Avoid Extreme Heat (Near the Fire, In Direct
Sunlight, for Example)
„ When the Battery Has Deteriorated, Contact
Your Technical Support Office to Replace the
Battery
WARNING
Fire or electric shock may result.
„ Do Not Do Anything That May Damage the
AC Cord, the AC Plug, or the AC Adaptor
Do not damage or modify the cord, place it
near hot tools, bend, twist, or pull it force-
fully, place heavy objects on it, or bundle it
tightly.
Ö Do not continue to use a damaged AC cord,
AC plug and AC adaptor.
• Contact your technical support office for repair.
„ Do Not Connect the AC Adaptor to a Power
Source Other Than a Standard Household
AC Outlet
Ö Connecting to a DC/AC converter (inverter)
may damage the AC adaptor. On an airplane,
only connect the AC adaptor/charger to an
AC outlet specifically approved for such use.
„ Do Not Pull or Insert the AC Plug If Your
Hands Are Wet
„ Do Not Disassemble This Product
„ Do Not Touch This Product In a Thunder-
storm If Connected with the AC Cable or Any
Other Cables
„ If a Malfunction or Trouble Occurs, Immedi-
ately Stop Use
If the Following Malfunction Occurs, Imme-
diately Unplug the AC Plug and the Battery
Pack
• This product is damaged
• Foreign object inside this product
• Smoke emitted
• Unusual smell emitted
• Unusually hot
Ö After the above procedure, contact your techni-
cal support office for repair.
„ Clean Dust and Other Debris of the AC Plug
Regularly
• If dust or other debris accumulates on the plug,
humidity, etc. may cause a defect in the insula-
tion.
„ Insert the AC Plug Completely
Ö Do not use a damaged plug or loose AC outlet.
„ Close the Connector Cover Tightly When
Using This Product Wherever There is a
Lot of Water, Moisture, Steam, Dust, Oily
Vapors, etc.
Ö If foreign matter has found its way inside, im-
mediately turn the power off and unplug the AC
cord, and then remove the battery pack. Then
contact your technical support office.
3