Personalisation; Setting The Temperature; Setting The Drying Cycle - Hotpoint Ariston ARMXXF 1690 Bedienungsanleitung

Personalisation

Setting the temperature

By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash ( ).
The washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for
each wash cycle.

Setting the drying cycle

The desired drying cycle type may be set by pressing the DRYING
button once or several times. Two options are available:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they have been
dried:
Iron dry : slightly damp clothes, easy to iron.
Cupboard dry : very dry clothes, recommended for towelling
and bathrobes.
If your laundry load to be washed and dried is much greater than
the maximum stated load (see adjacent table), perform the wash
cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this
point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load.
N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the desired
drying duration using the DRYING button.
Functions
The various wash functions available with this washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Delay timer
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed (this
may be between 1 hour and 24 hours).
To disable the function press the button until the text
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
!
This option is enabled with all programmes.
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this
function offers a high-performance wash.
!
This function may not be used in conjunction with wash cycles 4, 5, 6, 9, 10, 11, 12, 13, B, C.
Extra rinse
By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! This function may not be used in conjunction with wash cycles 4, 5, 11, 12, 13, B, C.
1600-800
By selecting this function, reduces the spin speed.
!
This function may not be used in conjunction with wash cycles 9, C, 11, 12, 13.
Table of Drying times
Fabric
Load type
type
Clothing of different
Cotton
sizes, Terry towels
Synthe-
Sheets, Shirts, Py-
jamas, socks, etc.
tics
Knitwear, Pullovers,
Wool
etc.
is displayed.
(guideline values)
Max. Cupboard Iron
load (kg) dry dry
4 120 100
3 140 100
1,5 150 120
GB
7