Plug & Play Feature - Samsung PS50B579T6S Bedienungsanleitung

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
N
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.
N
1. Press the POWER button on the remote control. Select the OSD Language. menu
is automatically displayed. Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER E button to confirm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER E button.
We recommend setting the TV to
N
home environment.
Store Demo mode is only intended for use in retail environments.
N
If the unit is accidentally set to
N
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER E . Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER E button to confirm your
choice.
4. Press the ▲ or ▼ button to memorise the channels of the selected connection, then press the ENTER E button.
• Air : Air antenna signal.
• Cable : Cable antenna signal.
• Satellite : Satellite antenna signal.
5. Press the ▲ or ▼ button to select the channel source to memorise. Press the ENTER E button to select Start.
When selecting Air or Cable,
N
• Digital & Analogue : Digital and Analogue channels.
Digital
• : Digital channels.
• Analogue : Analogue channels.
For more detailed description of selecting Cable mode, refer to page 13.
N
When selecting Satellite, you can configure LNB Setting. (Fore more detailed description of LNB Setting, refer to page 15.)
N
• All : Selects All as Channel type.
• TV : Selects TV as Channel type.
• Radio : Selects Radio ad Channel type.
Select the satellite and the scan mode to scan.
N
The channel search will start and end automatically.
N
6. The message Set the Clock Mode is displayed. Press the ENTER E button. Press the ▲ or ▼ button to select Auto, then press the
ENTER E button.
If you select Manual, Set current date and time is displayed. (For a more detailed description of Manual, refer to 25 page)
N
If you have received a digital signal, the time will be set automatically.
N
7. The brief instruction on How to get the best performance from your new HDTV. is displayed. Press the ENTER E button.
This menu is available
N
8. The message Enjoy your TV. is displayed. When you have finished, press the ENTER E button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER E button.
2. Press the ENTER E button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is '0-0-0-0'.
If you want to change PIN number, refer to 27 page.
N
The Plug & Play feature is only available in the TV mode.
N
Home Use mode for the best picture in your
Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
HD Connection Guide in the Support menu.
English - 11
Plug & Play
Select the OSD Language.
Nederlands
English
Menu Language :
Eesti
U
Plug & Play
Time
Language
Subtitle
Digital Text : Enable
Security
Network
General
▲
▼
Move E Enter
►