Safety Instructions - Electrolux Assistent Stand Mixer 400 Gebrauchsanweisung

g
Dear customer,
g
Please read these operating instruc-
tions through carefully.
Above all please follow the safety
instructions on the first few pages of
these operating instructions! Please
keep the operating instructions for
future reference. If applicable pass these
instructions on to the next owner of the
appliance.
1 With the warning triangle and/or by
means of key words (Danger!, Cau-
tion!, Attention!), information is
emphasized which is important for
your safety or the correct functioning
of the appliance. It is essential that this
information is observed.
0 This symbol guides you step by step
through the operating procedure for
your appliance.
After this symbol you receive supple-
3
mentary information on the practical
application and use of the appliance.
2 Tips and information about the eco-
nomical and environmentally friendly
use of the appliance are marked with
the clover.
28
Description of the
ce (Figure 3)
applian
A Accessory release button
B ON/OFF switch
C Speed range selector switch
D Pulse button
E Mixer
F Raise/lower button
G Lock release
H Mixing bowl speed selector switch
J Processor stand
K Plastic mixing bowl
(Stand Mixer 400 only)
L Whisks
M Dough hooks
N Dough scraper
O Stainless steel mixing bowl with lid
(Stand Mixer 450 only)
P Type plate (on bottom of processor
stand and bottom of mixer)
1

Safety instructions

The safety standards of Electrolux elec-
tric appliances are in keeping with the
recognised rules of technology and the
law governing the safety of appliances.
Nevertheless as a manufacturer we are
committed to familiarise you with the
following safety instructions:
General safety
• The appliance may only be connected
to a power supply whose voltage and
frequency comply with the specifica-
tions on the rating plate!
• Never pick up the appliance if
– the lead is damaged,
– the housing is damaged.
• Never use the lead to pull the plug out
from the socket.
• In order to avoid danger, if the connec-
tion lead of this appliance is damaged,
it must be replaced by the manufac-
turer, its customer service department
or a similarly qualified person.