Using The Drivers And Utilities Cd; Running The Dell Diagnostics - Dell OptiPlex GX60 Installierung Und Schnellreferenzhandbuch

Using the Drivers and Utilities CD

To use the Drivers and Utilities CD (also known as the ResourceCD) while
you are running the Microsoft Windows operating system, perform the
following steps:
Turn on the computer and allow it to boot to the Windows desktop.
1
Insert the Drivers and Utilities CD into the CD drive.
2
If you are using the Drivers and Utilities CD for the first time on this
computer, the ResourceCD Installation window opens to inform you
that the Drivers and Utilities CD is about to begin installation.
Click OK to continue.
3
To complete the installation, respond to the prompts offered by the
installation program.
Click Next at the Welcome Dell System Owner screen.
4
Choose the appropriate System Model, Operating System, Device
5
Type, and Topic.
Drivers for Your Computer
To display a list of device drivers for your computer, perform the
following steps:
Click My Drivers in the Topic pull-down menu.
1
The Drivers and Utilities CD scans your computer's hardware and
operating system, and then a list of device drivers for your system
configuration is displayed on the screen.
Click the appropriate driver and follow the instructions to download
2
the driver to your computer.
To view all available drivers for your computer, click Drivers from the Topic
pull-down menu.

Running the Dell Diagnostics

The Dell Diagnostics is a program that tests various components in your
computer. Run this program whenever you have a computer problem to
help you identify the source of the problem.You can run the Dell
Diagnostics from your hard drive or the Drivers and Utilities CD.
NOTE: To access device
drivers and user
documentation, you must
use the Drivers and
Utilities CD while you are
running Windows.
Setup and Quick Re ference Guide
9