Samsung KE55S9C Schnellanleitung Seite 12

Connecting the TV to One Connect
One Connect must be connected to the TV via the One Connect cable before
connecting an external device. The One Connect cable has two different ends, Connect
the TV to One Connect referring to the diagram.
<One Connect-end Connector> <TV-end Connector>
TV
<One Connect-end Connector>
[ The connectors at both ends of the One Connect cable are different
from each other in shape. When connecting the One Connect cable
to the TV, make sure that the right connector is plugged into the TV.
Otherwise, it may cause product failure.
[S9C-ZG]BN68-05491D-01L04.indb 12
One Connect
<TV-end Connector>
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-
ray players, home theatres, and other third-party external devices connected to the TV
using the TV's remote control.
Plug the cable into the TV IR connector and then point the transmitter at the other
end of the cable towards the external device's remote panel receiver. However, there
can't be any obstacles between the IR extension cable and the external device. The
presence of an obstacle will interfere with the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and
then press SOURCE to bring up the Source screen.
2. Select Universal remote setup from the top of the screen. This initiates the
universal remote setup process.
3. Follow the on-screen instruction and set up the universal remote control. If it does
not work, set up the remote control by entering the model number manually.
English - 12
5 cm 5 cm
2013-10-31 11:16:18