Setting Up Selphy - Canon SELPHY CP810 Benutzerschulung

Caution
Unplug the product from the power outlet when you are not using it.
Do not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting
in fire.
Never reuse paper for printing, even if an image is only printed on part of the paper, and there is
leftover blank space as shown.
Reusing paper to print can cause the ink sheet to become stuck to the paper or cause paper jams and
damage the printer.
Do not disconnect the power plug while printing.
If you have accidentally turned off the power, turn it on again and wait for the paper to be ejected. Consult
your retailer or a Canon Customer Support Help Desk in the event of a paper jam. Do not remove jammed
paper by force. This may damage the printer.
Do not use the printer near a device that creates a magnetic field such as a motor, or in a dusty
place.
This may cause the printer to malfunction.

Setting Up SELPHY

More than the
length of the
paper
10 cm
(4 in.) or
more
Do not use SELPHY near a device that creates a magnetic field such as a motor, or in a dusty
place. This may cause the printer to malfunction.
Do not place near a television or radio. This may cause the printer to malfunction.
Denotes the possibility of damage to the equipment.
Place SELPHY on a stable and even surface, such as a
table. Never place it on an unstable or tilted surface.
Keep SELPHY at least 1 m (3 ft.) from devices emitting
electromagnetic waves or strong magnetic fields.
Make sure there is at least 10 cm (4 in.) of free space
around SELPHY.
Since paper will pass in and out of SELPHY during
printing, make sure the space behind the printer is
greater than the length of the paper.
10 cm
(4 in.) or
more
5