Date/Time Mode - Pierenkemper PierenPlus basic Gebrauchsanweisung

left or right [▲] button increases the therapy time by 5 minutes (max. 90 minutes).
Pushing the left or right [▼] button decreases the therapy time by 5 minutes (min.
10 minutes). If the [ E ] or [•] button is pushed in the programme 1-12, the set time
is stored and the therapy time mode is left.
Pushing the [ E ] or [•] button in programme 13-15 puts the device in set-up mode
for the therapy frequency. The therapy frequency flashes. Pushing the left [▲]
button increases the frequency by one Hertz (max. 120 Hz). Pushing the left [▼]
button decreases the frequency by one Hertz (min. 1 Hz).
Pushing the [ E ] button in programme 13-15 puts the device in set-up mode for
the pulse width. The pulse width flashed. Pushing the left [▲] button increases
the pulse width by five microseconds (max. 300 µs). Pushing the left [▼] button
decreases the pulse width by five microseconds (min. 75 µs). Pushing the [ E ] or [•]
button will store the set parameters and the therapy time mode is left.
The PierenPlus basic turns-off automatically after two minutes if no key is pressed.
In this case no parameters will be stored.

Date/time mode

The LCD display shows two figures. The left figure indicates the date, the right
figure indicates the time. Pushing the left [▲] button increases the date by one
day (max. 30). Pushing the left [▼] button decreases the date by one day (min. 1).
Pushing the right [▲] button increases the time by one hour (max. 23). Pushing the
right [▼] button decreases the time by one hour (min. 0). By pushing the [•] button
all parameters are stored and the date/time mode is left.
The PierenPlus basic turns-off automatically after two minutes if no key is pressed.
In this case no parameters will be stored.
61