Original Erklärung Für Den Einbau Von Unvollständigen Maschinen; Electricity Supply - Linak LA12 Montageanleitung

Original Erklärung für den Einbau von unvollständigen Maschinen
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Herewith declares that LINAK TECHLINE ® products
as characterized by the following models and types:
Linear Actuators
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2014-10-20
Original Declaration
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
LA12, LA14, LA22, LA23, LA25, LA30, LA35, LA36, LA37
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
Seite 35 von 40