Herunterladen Diese Seite drucken

WISMEC REULEAUX RX200S Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Reuleaux
RX200S
Overview
Ventilation
holes
Magneticback cover
OO Fngl,sh
2. Stealth function:
While the device is on, simultaneously hold the fire button and
the eft regulatory button This will switch the screen display on and off.
3. Key lock function:
While the device is on, simultaneously press the two
regulatory buttons. This will switch between Key Lock and Key Unlock function.
4. Micro
USB Port function:
The USB port can be used for charging and upgrading firmware. It is better to take
out the cells and charge them through external charger.
5 Switch the display
mode:
By pressing the left and right regulatory buttons simultaneously in shutdown state,
the screen display will rotate 180 degrees You can then view the screen from two
kinds of angle through this operation.
Shift among VWITC-Ni/TC-Ti/TC-SS/TCR
Mode
1. Press
the fire button
5 times
to turn
the device
The OLED screen presents 4 rows of information:
OO Engl,sh
TCR (MI, M2, M3): In TCR (Temperature Coefficient of Resistance) mode, users can set the parameters
according to the TCR of coil. Under TCR mode, when the mode indication flashing, press the left regulatory
button and then the sub-menu items (MI , M2, M3) will flash. Press the right regulatory button to choose
mode among MI , M2 and M3 and then press the fire button to confirm
ICRMI
r_100A
The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right
regulatory button simultaneously, then you enter into the TCR set menu:
(1) Press the left or right regulatory button to choose among TCR MI, M2 and M3;
(2) Press the fire button to confirm the mode you chosen;
(3). Press the eft or right regulatory button to increase or decrease the parameter according
to the TCR Of coil;
regulatory button, the temperature readings WII automatically change to the lowest
Fahrenheit (200'F). Equally, if the temperature is decreased below the minimum (1000C), the
unit will change back to 'F automatically, and the temperature will start to decrease from 600
Wattage adjustment:
While the wattage sign blink, press the right or left regulatory button to
adjust the wattage, and press fire button to confirm. Long pressing the right or left regulatory
button will make the wattage setting rapidly increase or decrease
Resistance
locked function:
While the resistance sign blink, press the right regulatory
button to lock or unlock the resistance of the atomizer. (Note: Such operation should be
carried out at room temperature.)
New atomizer
installation:
In TC mode,
be careful
cooled to room temperature
If a new atomizer has not coo ed down before attaching, the
temperature may read and protect incorrectly until the new atomizer cools.
Note:
(1 ) When you connect a new atomizer or disconnect and reconnect your existing atomizer,
Malfunction
Indication
and
Protection:
No Atomizer
Alert:
When the device
does not detect
will display "NO Atomizer Found"
Atomizer
Low
Alert:
When
the
resistance
of atomizer
mode or lower than 0 050hm in TC modes, the OLED screen will display "Atomizer
Low"
Atomizer
Short-circuit
Protection:
When atomizer
Screen will display "Atomizer Short"
Temperature
Alert: If the internal temperature Of the device is over 700C, the Output
will shut off automatically and the screen will display "Device Too Hot"
Over 10 Second Protection:
When the power button is pressed for over 10
seconds, the output wil shut off and the OLED screen will display "Over IOS
Protection"
Charge Error Alert: When no current is detected in charging state, the
OLED screen wil display "Charge Error'
Check Battery Alert: When one of the cells is not installed correctly, the
OLED screen wil display "Check Battery'
Warning
1. Keep out of reach of children.
2 This device is not recommended for use by young people or non-smokers
OO
11
510 spring connector
Fire
button
OLED
screen
Regulatory button
Micro USB port
Stealth
Key
TCNi
P Owe
r
on.
c„-JDA
ICRM2
Power
Olli
to attach
new atomizers
that have
an atomizer,
the OLED
screen
is lower
than
0 1 ohm
in VW
No
Atomizer
Fund
short-circuit
occurs,
the OLED
Atomizer
Short
Check
Charge
usa
Adap ter
Error
Specification
& Features
Size:
50 0±40.0+84.0mm
Thread Type: 510 spring oaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR
Output Wattage: 1-200W
Resistance
Range: 0 05-1 50hm for TC modes
0 1-3 50hm for VW mode
Temperature
Range: 100-3150C/ 200-6000F (TC modes)
How to use:
1. Power
on/off:
Unplug the magnetic back cover and put three 18650 cells into the battery body. Press the fire button 5
times in quick succession to turn the device on and Off.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using
Moreover, please be careful not to use battery with torn shell for safety.)
(1) Mode (VW, TC-Ni, TC-Ti, TC-SS, TCR) and
Battery indicator
(2). Temperature in TC modes or Output wattage in
VW
mode.
Stealth
(3). Output wattage in TC modes or Voltage in VW
mode
(4) User information (Current, Puff, Time) and
Resistance.
2. Press the fire button 3 times, the mode indication will flash to indicate you enter into the menu. Press the
right regulatory button to switch between VW, TC-Ni, TC-Ti, TC-SS and TCR mode. Press the fire button,
LlrLock
or leave the display to flash 10 times on the current setting to confirm and exit the menu
oto
VW Mode: In this mode, output wattage can be adjusted from IW to 200W by pressing the regulatory
buttons, right to increase and left to decrease
•am,0d
TC-SS
Mode:
The
-rc-ss
(4). Keep pressing the fire button or leave the interface for about 10 seconds to confirm
Following is the TCR value range of Reuleaux RX200S for your reference:
ss (303, 304, 316, 317)
Note: (1) The TCR value in the sheet is 105 multiplied of the actual TCR
(2) The TCR value range for Reuleaux RX200S is 1-1000
TCR
Set
012
Supplementary
TC Modes Functions:
M2
012
Temperature
adjustment:
with the two regulatory buttons, right to increase and left to decrease.
M3
012
Shift between oc and F: If you increase the temperature to 315 'C, and continue to press the right
the device will prompt you to confirm this change and a message will prompt "New Coil Right, Same Coil
Left" Press the right regulatory button to confirm that a new atomizer has been attached. Press the eft
regulatory button to confirm that the same atomizer has been reconnected
(2) When using normal coil or the resistance of coil you used is higher than 1.50hm in TC modes, the
device will automatically switch to VW mode
Power
eon.o
Display of Battery Level: While the battery sign flash, press the right regulatory
button to shift between battery symbol and battery percentage.
Shift among Current, Puff and Time: While the user information sign blink, press
the right regulatory button to shift among Current, Puff and Time.
New Coil
0 2SQ
R ight
Same
Co il
Power
Left
Temperature
Protection:
set temperature, the device shows "Temp Protection"
Weak Battery Alert: In VW/TC mode, when the device insta led with an atomizer is
working and the vo tage of battery is be ow 2.9V, the device shows "Weak Battery"
A torn Izer
Meanwhile, the Output power will be reduced accordingly
Low
Low Power Alert: If the power of battery is ower than 10%, the power symbol on
the screen will flash
Imbalanced
Alert:
When
voltage is equal or greater than 0 3V, the OLED screen will display "Imbalanced
Batteries" after inserting the USB cable. Then please take out the cells to charge or
Device
replace with freshly charged cells.
Too Hot
Check USB Alert: When the voltage of the USB charger is equal or greater than
5 8V, the OLED screen will display "Check USB Adapted' after inserting the USB
cable Or vaping
aattery
Mode
Volt
Power
6.14511
mode
is suitable
to SS316
coil
Material
TCR Value
Nickel
NiFe
Titanium
In TC modes, the temperature can be adjusted from (100-3150C or 200-600'F)
POwer
Power
100.0111
ÜÜ020
0002
In TC modes, if the actual temperature of coil reaches the
the
difference
between
the maximum
and
minimum
1151
P
1151
P
P crever
Power
English00
Range
600-700
300-400
300-400
80-200
100%
100.0
Volt
6.u5
6.45
orjou
0211
Temp
P rotect
ion
Power
81.011.1
Over
10 s
Protection
ozon
cell
Weak
I mbalanced
aa t tery
0200.
10
English00
12

Werbung

loading