Basic Assembly - Auerswald COMpact 5000R Inbetriebnahmeanleitung

Important Information
enabling external and internal calls. For this purpose, the PBXs provide a num-
ber of different ports/interfaces.
These PBXs are structured modularly. The various modules available allow the
systems to be extended step for step depending on how many subscriber con-
nections and ports are required.
The COMpact 5000 is a PBX with a plastic casing available for wall mounting.
The COMpact 5000R is a PBX with a 19" casing available for installation in a
19" rack.
The PBXs are suitable for use in the commercial sector (small to midsize com-
panies). The COMpact 5000R is suitable for use in structured IT/telecommuni-
cation networks.
The PBXs have numerous features, including performing the following tasks:
Important: Many features are not available until they are set up via the
PBX configuration manager.
In order to use some of the features, it is necessary to contact the network
provider about activating the feature.
In order to use some of the functions, these have to be released in the
Upgrade Center.
In order to use some of the functions, it is necessary to extend the hard-
ware.
There may be some incompatibility in combination with end devices of other
dealers that adversely influences the usability of functions.

Basic Assembly

The basic assembly on the PBXs includes the following connection options:
The basic assembly offers the following hardware functions for the PBXs:
54
Call distribution
Ensuring availability
Charge and call data evaluation
Cost control
Central call answering machine (voice mail) and fax memory
Group and team administration
Call transfer
Do-not-disturb
1 Ethernet port
1 USB host port
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014