Avantree BTHT-5009 Bedienungsanleitung

A Avantree@
For a Better Experience
Wireless Headphones
User Manual
Bedienungsanleitung
and Transmitter Set
Mode d'emploi
Model No.: BTHT-5009
NO NEED to pair! Manuale
Units auto-reconnect
Manua
Scan for FAQ
Support.avantree.com
What's in the box?
AS9S Oasis Plus Optical
3.5mm
BT Headphones BTTransmitter Audio Cable Audio Cable
Products overview
(MFB)
Status indicators
Antenna
LL/HD priority Voice prompt
Switch Speaker
Bluetooth
button S
Mode Switch
USB Port
AUX&OPT switch
Voiceon/off b utton 9/ O
Volume/Track/
Reset button
(Receiver
English
READ FIRST!
1. Check your TV/Audio
EN
Jack
Options
di Istruzioni
e Usuario
Natively
Supported?
Please refer
to Point:
2. Turn on Transmitter
Powering up the transmitter
2.1
Power up the transmitter with the USB cable provided. Connect it to a TV USB port
(TV needs to be turned on) or any other USB charger that supports 5V/500mA-2A.
2.2 Turn on both
o o
Turn on the transmitter - Slide Mode switch to "TX" position, the "TX" LED
will start flashing WHITE.
Turn on the headphone —Press and hold
They will auto-reconnect, indicators are: 1) Headphones says "Welcome to Avantree.
Connected". 2) Transmitter says"Connected. Ready for use." The "TX" LED will stop
flashing and the"A" LED will light up.
Connect Transmitter to your TV/audio source
3.
3.1 Optical Audio Out, refer to Fig 3-1
3.5mm to RCA Micro USB
Audio Cable Power Cable*2
Now you should be able to use the headphones. IF there's no sound:
a. Ensure the transmitter LED "OPT" is on. If not, short press@once.
b. Ensure your TV speaker is set to "External Speaker", refer to Fig 3-2.
c. Ensure your TV Audio Format is set to "PCM" or "DOLBY/DTS" is off (this is IMPORTANT), refer to
Fig 3-3.
Speakers
O Internal s peakers
@ External s peakers
O Headset
Note: Unplug any devices from the 3.5mm AUX jack while using the OPTICAL output.
3.2 AUX/3.5mm Audio Out, refer to Fig 3-4
O
Output
Input
mode) (Transmitter mode)
User Guide
Source output options, refer to Fig-I -1
RCA jacks Other RCA
Optical Big Phone
AUX/3.5mm
labeled jacks (usually
OUT Jack
"AUDIO OUT" audio IN)
oo
00
3.1 3.2 3.3 N/A 3.4
ig - Output Option
and Headphones
devices
for 2 seconds until you see the BLUELED light.
(P
ower option
ower option
Micro USB power cable
OPTICAL
Optical audio cable
Set Up Oasis Plus using optical audio ou
Settings
Dolby Digital
Audio Form
DTS
DTS Neo
p ower option 2
ower option
AUX/3.5mm
Micro USB power cable
AUX/3.5 mm audio cable
ig 3-4 Set up Oasis Plus using AUX/3.5mm audio o
Speakers
O Internal s peakers
O Externalspeakers
@ Headset
Fig 3-5 SetTV spea er to "Hea set
Short press once to select AUX audio, the "AUX" LED will turn on.
Now, you should be able to use the headphones. If there's no sound, please ensure your TV
speaker is set to "Headset", refer to Fig 3-5
3.3 RCA Audio Out (Red/White ports labeled "AUDIO OUT 'I), refer to Fig-3-6
ower option
AUDIO OUT
(P
ower option
Micro USB power cable
AUX/3.5 mm audio cable 3.5mm to RCA audio cable
Short press O once to select AUX audio, the "AUX" LED will turn on.
Now you should be able to use the headphones. If there's no sound:
a. Make sure you've used the TV Red/White ports labeled "AUDIO OUT." Other Red/White ports
will NOT work. Refer to Fig 3-7
b. Ensure your TV speaker is set to "External Speaker", refer to Fig 3-8
TV REAR
AUDIO OUT
@ @ O @ @ COMPONENT IN
@ @ @ VIDEO IN
3.4 Receivers with 6.35mm Phone Jack at Front, refer to Fig-3-9
PHONES
6.35mm
3.5mm Converter
Micro USB power cable
3.5mm
ig 3-9 Set up Oasis Plus using 6.35mm phone jac
Short press once to select AUX audio, the "AUX" LED will turn on.
NOTES:
Please do NOT use the RCA ports on the back of your AV receiver. They will not work and may
permanently damage the transmitter.
ONLY use the BIG 6.35MM PHONE OUT jack located on the FRONT of your AV Receiver with a
6.35mm to 3.5mm adapter (not included).
• Do NOT set the volume too high.
• We recommend you test the audio port with a wired headphone before use.
Speakers
O Internal s peakers
@ External s peakers
O Headset
00
HONES
to
(purchase separately)
audio cable