Werbung
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Intended use
The machine is intended for blowing and vacuuming.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-1:
With nozzle
Work mode: operation without load (blowing)
Sound pressure level (L
Sound power level (L
) : 92 dB (A)
WA
Uncertainty (K) : 3 dB (A)
With nozzle
Work mode: operation without load (vacuuming)
Sound pressure level (L
Sound power level (L
) : 95 dB (A)
WA
Uncertainty (K) : 3 dB(A)
The typical A-weighted noise level determined accord-
ing to EN IEC 62841-4-6:
With garden nozzle
Work mode: operation without load (blowing)
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Sound power level (L
) : 91 dB (A)
WA
Uncertainty (K) : 2.0 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-1:
With nozzle
Work mode: operation without load (blowing)
Vibration emission (a
) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
) : 84 dB (A)
pA
) : 87 dB(A)
pA
) : 81 dB (A)
pA
2
or less
2
With nozzle
Work mode: operation without load (vacuuming)
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The vibration total value (tri-axial vector sum) deter-
mined according to EN IEC 62841-4-6:
With garden nozzle
Work mode: operation without load (blowing)
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless garden blower/vacuum
safety warnings
1.
Do not use the machine in bad weather condi-
tions, especially when there is a risk of light-
ning. This decreases the risk of being struck by
lightning.
2.
Check the debris collector frequently for wear
or deterioration. A worn or damaged debris col-
lector may increase the risk of personal injury.
6 ENGLISH
2
) : 2.5 m/s
or less
h
2
2
) : 2.5 m/s
or less
h
2
Werbung
