Husqvarna DM 200 Bedienungsanweisung Seite 6

may extend through the hole or the core may fall out
on the other side.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product,
you must read and understand the contents of this
operator's manual.
• This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
• Save all warnings and instructions.
• Comply with all applicable laws and regulations.
• The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
• Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
• Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
• Do not let a child operate the product.
• Only let approved persons operate the product.
• The operator is responsible for accidents that occur
to other persons or their property.
• Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
• Always be careful and use your common sense.
• This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Do not use the product if it is damaged.
• Do not make modifications to this product.
• Do not operate the product if it is possible that other
persons have made modifications to the product.
Always use common sense
WARNING:
should you modify the original design of
the product without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
6
Read the warning
Under no circumstances
accessories may lead to serious injury or
death to the user or others.
WARNING:
as cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
It is not possible to cover every conceivable situation
you can face when using the product. Always exercise
care and use your common sense. Avoid all situations
which you consider to be beyond your capability. If
you still feel uncertain about operating procedures after
reading these instructions, you should consult an expert
before continuing.
Do not hesitate to contact your HUSQVARNA
representative if you have any more questions about the
use of the product. We will willingly be of service and
provide you with advice as well as help you to use your
product both efficiently and safely.
Let your HUSQVARNA dealer check the product
regularly and make essential adjustments and repairs.
Husqvarna Construction Products has a policy
of continuous product development. HUSQVARNA
reserves the right to modify the design and appearance
of products without prior notice and without further
obligation introduce design modifications.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
• Do not operate the product unless you can get aid if
an accident occurs.
• Do not use the product in bad weather, such as
fog, rain, strong winds, intense cold and equivalent
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
• Look out for persons, objects and situations that can
prevent safe operation of the product.
• Make sure that you always can stop the motor
quickly in an emergency.
• Make sure that there are no pipes or electrical
cables in the area where the hole will be made.
• If the product does not operate correctly, stop the
motor.
• Make sure that you are in a safe and stable position
during operation.
The use of products such
Read the warning
1416 - 008 - 18.10.2024