AEG CCE84773CB Benutzerinformation Seite 9

INTEGRATED INSTALLATION
Find the video tutorial "How to install your
AEG Extractor Hob" by typing out the full
name indicated in the graphic below.
How to install your AEG
Extractor Hob
Filter housing assembly
Before first use make sure to insert the filter
inside the housing, with the black sides facing
inwards and the silver sides facing out. Refer
to "Cleaning the hood filter". Once the filter
housing is assembled, put it inside the hood
cavity and place the grid on the hood.
3.5 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. The single wire must have a
diameter of minimum 1,5 mm². Speak to
your local Service Centre. The connection
cable may only be replaced by a qualified
electrician.
WARNING!
All electrical connections must be made
by a qualified electrician.
www.youtube.com/electrolux
www.youtube.com/aeg
ENGLISH 9