exquisit KGC231-60-010E Gebrauchsanweisung Seite 32

Setting up and connecting
15. Fix the hinge (1) on the left with the screws (4) and
screw in the foot (3).
16. Fix the foot (2) on the right with the screw (5).
17. Place the lower appliance door on the lower hinge and
close it.
18. Unscrew the pin of the middle hinge.
19. Turn the middle hinge 180°.
20. Screw in the pin so that it points upwards.
21. Place the middle hinge on top of the lower appliance door
and screw it on.
22. Unscrew the pin from the upper hinge.
23. Turn the hinge 180° and screw in the pin so that it points
downwards.
24. Remove the screw hole cover (1) at the top left and fit it
on the right side (2).
25. Place the upper appliance door on the middle hinge.
26. Insert the upper hinge (1) and fix it with the screws (2).
27. Align the appliance door vertically and horizontally.
28. Check that the seals close well.
29. Screw all hinges on tightly.
30. Remove the hinge cover (3) from the separate plastic
bag.
31. Place the cover on the left, push it slightly to the right
and press it firmly in place.
10.2 Setting up the appliance the appliance
Place the appliance
• in accordance with the prescribed minimum clearances.
• Set up the appliance in a dry, well-ventilated room whose ambient temperature
corresponds to the climate class for which the appliance is designed.
ATTENTION
APPLIANCE DAMAGE!
Leave the appliance to stand for 12 hours after transport to allow the refrigerant to
collect in the compressor. Failure to observe this may damage the compressor and cause
the appliance to fail. This would void all warranty claims.
Page 32 of 48