Rear Spacers - AEG S32500KSW1 Benutzerinformation

28 www.aeg.com

9.2 Rear spacers

9.3 Levelling
2
1
45°
A
45°
2
In the bag with the documentation,
there are two spacers which must be fit-
ted as shown in the figure.
1. Fit the spacers into the holes. Make
sure that the arrow (A) is positioned
as shown in the picture
2. Turn counter-clockwise the spacers
through 45° until they lock into
place.
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.