Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Add New
Device
OMNI
o
Fig 10
4. To connect
to COROSTM smart
COROSTM OMNI App
automatically
connect to the COROS OMNI.
Connecting
the Smart Remote
I. Pairing: Tap on Smart Remote under Device to enter the Pair
interface (see Fig. 11). Click the "Match" button
(see Fig. 12) and then press and hold any key on the Smart
Remote until the "Successfully
Remote
Fig 11
Fig 12
devices,
launch
the
Wait for a few seconds,
the App will
(see Fig. 10)
Paired" message appears.
2. Mounting your Smart Remote: Your package contains the
Smart Remote, plus the remote holder and 2 rubber rings.
Find a spot on your bicycle handlebar
near your right or left hand (Fig. 14, Image 1). Position the first
rubber ring at one corner of the holder and stretch the ring
diagonally
to catch on the opposite corner as shown in Image
2. Attach the second rubber ring to the other two corners.
Image 3 shows the holder installed correctly, with the Smart
Remote placed into position. Note: the orientation
Smart Remote is flexible based upon the rider' s preference.
to mount the holder,
of the
Fig 14
09
Werbung
