Yoer Astralo KM03S Instruktionen Seite 52

MIXER
Accessory installation
CAUTION: Before commencing any of the activities described below, unplug the device.
1. Set the device on a flat, stable surface.
2. Press the kitchen machine head lifting lever and lift the head upwards until you hear
it click into place.
3. Put the mixing paddle, hook or beater onto the mixing element axle, so that the inset
on the axle slides into the groove on the mixing element mount. Push it in until you feel resistance,
and then twist it clockwise. A characteristic "click" informs that the mixing element has been installed
properly.
4. Place the bowl in its mount. Twist it clockwise until you feel resistance. Put ingredients inside.
5. While holding the kitchen machine head, press the lifting lever and lower it until you hear
it click into place.
6. Place the cover on the bowl in a way that allows you to mount the feeder in a direction that facilitates
convenient ingredient addition during the kitchen machine's operation. Position the feeder within the
cover's cutout area and then press firmly to connect both components.
Mixing elements:
Mixing paddle – for preparing
low-viscosity batter
(such as pancake batter)
ENGLISH
Hook – for kneading thick doughs
(such as shortbread or yeast dough)
52
Beater – for whipping eggs or
cream