Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
Continued
Secure the equipment during installation so it cannot fall. Wear sturdy safety footwear
Notes on material damage or malfunctions
◗ Installing the equipment against the specified direction of flow or in the wrong location will
result in malfunctions. This could cause damage to the equipment or the higher-level system.
Install the equipment in the pipe in the direction of flow indicated on the body.
◗ Equipment made from materials that are unsuitable for the fluid used wear faster. This can
cause fluid to escape. Make sure the material is suitable for the fluid used.
◗ The equipment may be damaged if stored or transported incorrectly. Storage: Dry, clean
room air at 5–40 °C (non-condensing, non-corrosive). Close all openings to make sure the
equipment remains dry and is protected against corrosive atmospheres.
◗ Frost damage can occur when the plant is not in operation. Drain the equipment if there is
a risk of frost.
EN
Werbung
