Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Generally, you should only have to pair once as the playback device saves the name of the sound bar. This means you do not need to pair the
devices manually when you establish the connection again.
If you wish to disconnect an existing Bluetooth pairing or switch to pairing mode, press and hold the "PAIR" button (34) on the remote control for
about 1 second.
•
Now start music playback from the source device. The sound is played back via the sound bar.
•
You can use the
(14),
•
You can use the volume buttons (19, 33) to adjust the volume to your requirements.
Disconnect
The Bluetooth pairing is disconnected if ...
•
... either of the devices is switched off. A confirmation beep will sound.
•
... Bluetooth is switched off. A confirmation beep will sound.
•
... the sound bar and source device are beyond the Bluetooth range (approx. 10 metres).
•
...you keep the "PAIR" button (34) on the remote control pressed for about 1 second.
9.3.4 "USB" mode
The sequence of the tracks/folders played is determined by the order in which they are copied to the USB stick.
In this mode, you can use the sound bar to play back audio files stored on a USB storage device, e.g. a USB stick. If connecting a USB hard drive, please note
that the maximum current on the sound bar's USB connection is 500 mA. Please also see the user manual for the USB hard drive.
If you want to use a hard drive as a USB playback device, use a Y-cable with a separate power supply to connect it.
Please note there can occasionally be compatibility issues between the USB storage device and the sound bar, meaning only limited functionality is
available or it may not function at all. If this happens, try a different USB storage device.
It isn't possible to select USB mode when no USB device has been connected.
•
Connect the USB storage device to the USB port (10) on the sound bar.
•
If a USB storage device is already connected, USB mode starts automatically when you switch on the sound bar. Otherwise, press the "INPUT" button (18)
on the remote control to select this mode.
•
Use the
(14),
(17),
•
You can use the volume buttons (19, 33) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
Control functions available in "USB" mode:
Action
Press the
button (14).
Press the
button (14) if playback was previously paused with the
Briefly press the
button (15).
Briefly press the
button (13) or press and hold the
Briefly press the
button (35).
Briefly press the
button (16) or press and hold the
Press the
button (17).
Pressing the
button (24) repeats the track currently being played (display shows "r1") or repeats all folders stored on the storage device (display shows
"r").
Pressing the
button (26) shuffles all the folders on the storage device (rA shown on the display).
Pressing the
button (26) again exits shuffle mode (SE shown on the display) and playback reverts to the normal order.
LED display
r
r1
rA
SE
CAUTION! The USB port (10) must not be used to charge external devices.
(15) and
(35) buttons on the remote control or your source device to control playback.
(15) and
(35) buttons on the remote control to control the music tracks.
button (15).
button (35).
Function
All folders on a USB storage devices are repeated (endless playback).
Repeats the current track.
Shuffle mode for all folders.
Shuffle mode ended, playback in normal order.
Function
Pause / Resume current track.
Resume playback at beginning of last folder played.
button (17).
Skip to next track.
Skip to 1st track of next folder.
Skip to previous track.
Skip to 1st track of previous folder.
Pause playback, playback continues with the first track in the
first folder played when the
SSB 30 B1
button (14) is pressed.
English - 27
Werbung
