Werbung
Verfügbare Sprachen
Verfügbare Sprachen
@ Song select, start/stop, velocity, balance (volume), main
volume, expression pedal
Whether or not data for these items are transmitted/received
can be set.
Note:
velocity data
cannot
be transmitted,
but can
be
received.
<Procedure>
9. Turn on the appropriate buttons if these data are to be
transmitted/received. Turn off corresponding buttons if
not.
OCTAVE
@ Key note data transmit/receive
Set the input mode, the key note modes and whether the
VOICE
SETTING
COMPUTER
is selected
for the program
change data.
KEY ASSIGN MODE: Choose from among three key assign
modes for receiving key note data.
Key assign
Recognized key notes
All parts
SOLO, POLY*, BASS,
ACCOMP, DRUMS
st
&
SOLO***, POLY,
* Up to four notes can sound at one time for this part.
BASS***, ACCOMP**,
DRUMS***
POLY part.
CONDUCTOR
Application examples
POLY part only
Functions the same as
when the PCM Keyboard
is played.
Does not function.
Functions only in
response to input for
KEYBOARD
PERCUSSION
fe}
a]
VELOCITY
START/STOP
°o
a
START/STOP
ENDING
°
fees
SONG SELECT
RHYTHM
SOUND EDIT
... BALANCE (volume)
Use when an external instrument with "touch
response" is played.
Use for ensemble performance when each part is
played independently.
The mode used when the entire keyboard plays in
response to settings for the right part of the
keyboard.
** ACCOMP part notes are recognized only when the FINGERED or ONE FINGER button is on.
*** SOLO, BASS or DRUMS part notes are recognized only when the CONDUCTOR SOLO, CONDUCTOR
BASS or KEYBOARD
PERCUSSION button is off respectively.
KEYNOTE
ONLY:
In the on state, the data for program
change and control change are not transmitted/received.
AUTO PLAY CHORD: In the on state, the AUTO PLAY CHORD
function produces an accomp pattern for the ACCOMP and
BASS MID! outputs.
TRANSPOSE: In the on state, transposed keyboard notes are
output for all parts.
TECHNiI-CHORD: In the on state, keyboard notes created by
the TECHNI-CHORD
function are output for the POLY part
(when the TECHNI-CHORD button is on).
VOICE SETTING COMPUTER:
In the on state, the VOICE
SETTING COMPUTER is selected by the program change data
for
the
POLY
part.
(Program
change
data
are
not
transmitted/received for the SOLO part.)
TH—--OZM
Werbung
