Herunterladen Inhalt Inhalt Diese Seite drucken

Numark NVii Benutzerhandbuch Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 72
30. Auto / Roll: This Pad Mode button puts the pads in two modes: Auto-Loop Mode and
Loop Roll Mode. When the button is unlit, the first press will always select Auto-Loop
Mode.
Note: The pad layouts here match the software's default Auto-Loop time division layout.
If you shift the range of time divisions displayed in the software, the pad layout will
change to match it.
Auto-Loop Mode: Each pad triggers or releases an Auto-Loop of a different length.
Press and hold Shift and then press the Parameter < or Parameter > button to
shift the Auto-Loop backward or forward.
Loop Roll Mode: Each pad triggers a momentary Loop Roll. Press the Parameter <
or Parameter > button to change the Loop Roll's time division.
31. Loop: This Pad Mode button switches the pads between two banks of saved loops and
loop controls. When the button is unlit, the first press will always select the first bank.
Saved Loop Mode: Pads 1-4 (the top row) return the track to one of your saved
loops. You create and save a loop using Pads 5-8 (the bottom row). The pad layouts
for the two banks are identical.
To create a loop, press Pad 5 to set the Loop In Point, and then press Pad 6
o
to set the Loop Out Point and trigger the loop.
To save a loop, while a loop is active, press any one of Pads 1-4 (the top row)
o
that does not have a loop assigned to it. You can do this regardless of how the
loop was created (Saved Loop Mode, Auto-Loop Mode, Loop Roll Mode, etc.).
To trigger a saved loop, press any one of Pads 1-4 (the top row) that has a
o
loop saved to it. Press Pad 7 to activate or deactivate the loop. Press Pad 8 to
return the track to the last triggered loop and reactivate it ("reloop").
To delete a saved loop, press and hold Shift and then press the
o
corresponding pad (of Pads 1-4).
To halve or double the length of a loop, press the Parameter < or
o
Parameter > button.
To shift a loop backward or forward, press and hold Shift and then press the
o
Parameter < or Parameter > button.
8
1/4-beat
1/8-beat
2-beat
4-beat
Loop 2
Loop 1
Set Loop In
Set Loop Out
1/2-beat
1-beat
8-beat
16-beat
Loop 3
Loop 4
Loop On/Off
Reloop

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis