User Alert Functions; Making Ice Cubes; Removing And Attaching Shelves - Panasonic NR-B32SW1 Bedienungsanleitung

User alert functions

User alert functions become active in the following situations.
Situation Details
• The set time has been reached in Bottle
Mode has ended.
Mode.
• Any problem has occurred in sensor,
Problem detected. compressor, cooling system, or heater.
• The voltage is low.
• The fridge door has been left ajar for more
Door ajar.
than 2 minutes.

Making ice cubes

Open the freezer, pull out the upper drawer and take out the ice tray. Fill water in the ice tray to the water level line and
then place back the ice tray.
When ice cubes are ready, pull out the upper drawer and take out the ice tray. Slightly twist the ice tray by holding its two
sides, the ice cubes will drop from the ice tray. Then, put the ice tray back into its place.

Removing and attaching shelves

Fridge
Freezer
12 12
Water level line
Glass shelves
Lift the inner side of the shelf
slightly and pull it out.
When removing the glass
shelves, before pulling them
out, remove the door and
bottle shelves first if they
are in the way.
Pull the drawer towards you, lift the front slightly, and pull it out.
Having removed the drawer, you can store food in the empty compartment.
Alarm
Beeps continuously
Beeps every 5 seconds
Beeps every 5 seconds
Crispers
Pull the crispers towards you
and pull it out.
How to stop the alarm
Press
.
Press
.
Press
.
Door shelves and bottle
shelves
Lift it slightly and then
remove it.