• If there is intense pain or
redness after 2 or more
days, stop using the
appliance and consult a
dermatologist.
How to use
• The power will not turn on even when pressing the switch with
the AC adaptor connected to the main body.
• Recommended ambient temperature for operation is 5 – 35 °C.
The appliance might not be usable outside of the recommended
temperature.
1
1
Remove the cap.
2
2
Press and hold (for approximately 3 seconds)
to turn the power on.
• The power will turn off automatically if the appliance is not
used for approximately 1 minute.
3
3
Press
to select the output level.
SELECT
• Level 1 is selected when the power is turned on.
• The level cycles through 1
time the level selector switch is pressed.
• The level indication lamp blinks, and then turns on. (A beep
sounds, indicating that preparation for flash is complete.)
<Output levels>
Greater treatment effects
LV5
LV4
LV3
LV2
LV1
Minimal pain or irritation
2
3
4
5
1...each
4
4
When the level indication lamp
glows, apply the guard closely
against the skin and keep it
pressed until flashes.
When the appliance beeps, press the
head perpendicularly against the skin.
• Use the appliance after checking that
there are no other people nearby.
• Points for IPL hair removal (See this
page.)
• When the appliance beeps,
preparation for flash is complete.
5
5
Press
to turn the power off.
Points for proper IPL hair removal
Point 1
Apply the guard perpendicularly against
the skin and keep it pressed against the
skin.
The flash window will not flash unless it is
applied perpendicularly to the skin.
90°
15