Panasonic KX-HGT100EX Kurzanleitung Seite 13

PC connection
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5
mm in diameter or less.
• For further information on the connection to a PC, refer to the
documentation provided for the PBX.
Switching Hub connection (for LAN port)
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5
mm in diameter or less.
• It is recommended to connect to a switching hub that complies with the
IEEE 802.3af Power-over-Ethernet (PoE) standard.
• If PoE is available, an AC adaptor is not needed.
• This unit complies with the PoE Class 1 standard.
AC adaptor (not included)
• Use only a Panasonic KX-A239CE (PQLV206CE)/KX-A239BX
(PQLV206CE) AC adaptor.
• The AC adaptor is used as the main disconnect device. Ensure that the
AC outlet is located near the unit and is easily accessible.
CAUTION:
When selecting Ethernet cables
• Use flexible, high-quality, snagless (without strain relief) cables.
Do not use cables with coating that may tear or crack when
bent.
When connecting cables
• Do not connect the Ethernet cable connected to the PoE hub to
the PC port of the KX-HGT100. Doing so may cause severe
damage to the KX-HGT100.
• Ensure that the Ethernet cables and the AC adaptor cord are
inserted in the grooves to prevent damage to the connectors.
When connecting a headset and AC adaptor
• Ensure that the headset cord and the AC adaptor cord are
wound around the hook to prevent damage to the connectors.
Connection
13