TaoTronics TT-BA01 Benutzerhandbuch Seite 6

5.Reset
Sometimes, the TT-BAOI will refuse to pair with
Other devices even if it is in pairing mode with
red and blue light flashing. You will need to reset
the transmitter to make it fresh and wanting to
pair again.
To reset the transmitter:
• Turn ON the transmitter
Double press the power button
Turn OFF the transmitter
You may need to try this a few times if it does
not work on your first attempt.
Care and Maintenance
Please read the following recomm-endations
keep your product running smoothly for a long
time to come.
Keep the transmitter
humidity.
Do not put the product under direct sunlight
or hot areas. High temperatures
lifespan of the transmitter, battery and/or the
internal circuit board.
• Do not try to take the product apart. It may
cause serious damage.
to
away from heat and
will shorten
Do not drop or knock your transmitter
hard surfaces as it damage
circuit.
Do not use chemicals or detergents to clean
the product.
Do not scrape the surface with sharp objects.
Trouble shooting
Q: My transmitter will not switch on.
Please recharge it and make sure the TT-
BAOI has enough battery power. Plug the
unit to a charger and see if the LED indicator
will become red.
Q: I am having trouble pairing and connecting
to my Bluetooth pairing device.
A: Please check the following:
Please make sure your Bluetooth
support A2DP profile.
Make sure turn OFF Other Bluetooth
around
Make sure the TT-BAOI and your device are
next to each other or within
• You must get the TT-BAOI into pairing mode
with LED indicator flashing in red and blue
alternatively
-8-
on
the interior
device
devices
3 feet