Eazyzap GP549 Bedienungsanleitung Seite 4

EN
Operation
WARNING: Under no circumstances
should hands be placed anywhere near the
appliance when it is in operation.
The appliance uses the specified wavelength of
LED black light tube to attract insects. Then the
insects are drawn towards glue board and can't
escape the strength of the glue.
The appliance is highly efficient and harmless to
humans and pets. To use the appliance:
1. Connect the power cord to the appliance then
to the mains power.
2. The light will come on and ready for use.
Replace the glue board regularly (on a
monthly basis). To change the glue board,
simply pull it out. Replace with a new
one.
To change the light:
1. Twist the LED tube anti-clockwise
from its socket.
2. Insert a new tube and twist clockwise
until tight.
3. Close the safety guard well.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is The unit is not switched on
not working
Plug and lead are damaged
Fuse in the plug has blown
Mains power supply fault
Tube has expired
Tube is faulty or has not been fitted
correctly
4
GP549_ML_A5_v1_20240318.indb 4
Cleaning, Care &
Maintenance
•
•
Changing the glue board and light
WARNING: Always turn Off the appliance
and disconnect from the power supply
before changing the glue board or light.
Open the safety guard to the right.
3
Glue board
Probable Cause
Always switch off the power and
disconnect the appliance from the power
supply before cleaning and maintenance.
DO NOT immerse the appliance in water. Wipe
the safety guard and external casing with a
damp cloth.
LED tube
Solution
Check the unit is plugged in correctly
Replace plug or lead
Replace the fuse
Check mains power supply
Refer to the 'Changing the glue board and light'
section
Safety guard
2024/3/18 14:13:49