Menu Function "Output; Menu Function "Pulse Output; Menu Function "Upper", "Lower" And "More - WIKA CEP6000 Betriebsanleitung

6. Commissioning, operation
The option "LIGHT" switches on the backlight for the LCD display. Press the correspond-
ing function key [F2] to switch on the backlighting.

6.2.2 Menu function "Output"

In the start menu for the function "Output" there are three active options "MENU", "LIGHT"
and "STEP" or "RAMP".
The first two options work just like in the start menu. The third option can be selected
via the automatic output function menu option, and acts to switch on or off the selected
automatic function. For further information, see chapter 6.5.2 "Using the automatic output
functions". The automatic output functions are stopped as soon as the menu is exited or
the [HOME] key is pressed.

6.2.3 Menu function "Pulse output"

The pulse start menu also has three active options, "MENU", "TRIG" and "COUNTS".
The options "TRIG" and "COUNTS" are used for pulse simulation. The function of these
options is explained in chapter 6.5.7 "Pulse output".

6.2.4 Menu function "UPPER", "LOWER" and "MORE"

The next level of the menu bar is the main menu itself. Which levels are available under
the main menu depends on the selected operating mode of the calibrator. The options are
"UPPER", "LOWER" and "MORE".
With "UPPER", the selection menu for the parameters of the upper display will be called.
With "LOWER", the selection menu for the parameters of the lower display will be called.
"MORE" switches to the next menu level.
WIKA operating instructions, model CEP6000
MENU LIGHT
MENU LIGHT
MENU TRIG COUNTS
UPPER LOWER MORE
STEP
GB
19