Fronius Symo 3.0-3-S Serviceanleitung Seite 120

Inserting the SymoFIL:
120
(4) (4)
(3)
(1)
(2)
Thread in the new SymoFIL and positi-
1
on it
Fit the SymoFIL with nine 4x9 TX20
2
screws (4)
[2 Nm]
Insert the ground connection (5) and
3
position it correctly
(4) (5)
Insert the PC board holders (3)
4
(3)
The PC board holders must be fully en-
5
gaged in the Datcom area (3)
Connect all cables and plug connec-
6
(2)
tions (1-2) to the SymoFIL
Insert the Recerbo, close the inverter
7
and place it in the wall bracket (see
"Replacing the display PC board -
Recerbo" and "Opening and closing
the device" sections)
Switch on the inverter and then carry out a
fan test via the display (see operating inst-
ructions)