Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit
Press and hold both the SEL (select) and
(standby/on/attenuator) buttons at the same time for
several seconds.
This will reset the built-in microcomputer.
Note:
Your preset adjustments-such as preset channels or sound
adjustments-will also be erased.
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on
the unit's chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
BEFORE USE
*For safety....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
2
4
Playing CDs .............................................. 16
9
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
(standby/on/attenuator)
SEL (select)